|
Compact and accurate the Raystar 125 Satellite Differential GPS Receiver provides pinpoint accuracy to Raymarine's C-Series and E-Series Multifunction displays. The Raystar 125 outputs either SeaTalk or NMEA 0183, and is fully compatible with Raymarine SeaTalk instruments and autopilots. A self contained waterproof GPS receiver and antenna combined, the Raystar 125 delivers accuracy better then 3 meters by decoding Satellite Differential correction signals from the WAAS (Wide Area Augmentation System.) The Raystar 125 comes with a 10 meter (33') interconnect cable, pole mounting kit, flush mounting kit and instruction manual. Raystar 125 Features Include: - Compatible with Raymarine E-Series, C-Series, Instruments and Autopilots.
- 12 channel satellite receiver with Satellite Differential corrections.
- WAAS, EGNOS and MSAS compatible.
- User selectable NMEA 0183 or Raymarine SeaTalk output.
- Low profile flush mount and threaded pole mount (1" x 14 TPI) kits included.
- Removeable interconnect cable facilitates easy installation.
- Built-in LED diagnostic indicator.
Raystar 125 GPS Sensor Specifications Data Interfacing
Protocols supported Either NMEA 0183 or SeaTalk User configured during installation. Environmental
Operating temperature range -10°C to +70°C
Non-operating temperature range -20°C to +70°C
Humidity up to 95%
Waterproofing standard CFR46 GPS Features
Type Active antenna
Signal acquisition 12ch. parallel (C/A code)
Satellite differential type WAAS/EGNOS/MSAS
Differential acquisition automatic (satellite)
Beacon differential ready with RTCM input
Position accuracy (RMS) <15m
Position accuracy with SDGPS (RMS) <5m
Speed accuracy (RMS) <0.3kts
Time to first fix from cold start (typical) <2.5min (<45sec)
Time to first fix (after initial cold start) typically <8 seconds
Geodetic datum WGS84 (190 programmable alternatives)
NMEA Sentences Supported
Input Sentences PRAYI, PRAYE, PRAYA
Output Sentences GPGGA, GPGSA, GPGSV, GPGLL, GPRMC, GPDTM, GPGNS, GPVTG, PRAYA
Version NMEA 0183 Version 2.3 Physical
Overall dimensions (DxH) mm diameter 95x30
Product weight kg (lbs) 0.13 (0.29)
Mounting methods flush/pole/rail Pole mount thread: 1" x 14 TPI. This is the standard thread found on VHF radio antenna mounts and extenstion poles.
Cable length 10m (33') Power
Nominal voltage (volts DC) 12V, 24V systems
Absolute voltage range (volts DC) 9 - 32 volts (NMEA configuration) 9 - 18 volts (SeaTalk configuration)
Power consumption (typical) watts 1.2W Additional Details
|