Art-tech Falcon 3D 6 Channel Electric Helicopter RTF

Falcon 3D\n\n With the new Falcon 3D, you get an completely assembled 3D capable helicopter right out of the box. Built using an advanced CCPM (Collective/Cyclic Pitch Mixing), which provides precision control over the collective pitch, elevator and aileron, this aggressively styled helicopter is perfectly suited to make perfect 3D maneuvers such as barrel rolls, inverted and swoop flights. The Falcon, it seems is the perfect combination of elegance of power, but what makes this helicopter shine are its many upgrades. The included 400 motor with built-in heat sink provides the power necessary to perform advanced flight maneuvers including inverted flight. The high torque micro servos used to control the pitch, yaw, rudder and collective provide precision movement without making the helicopter overly heavy, allowing it to retain its flight prowess. Included is a high powered 1300mAH 3-Cell Li-Po battery pack to power , the on-board electronics while maintaining optimal weight distribution. The on-board 6-channel receiver and heading gyro, act as the processing center, allowing for rapid and smooth control. Included is an upgraded transmitter, with 2 switches and 2 knobs to accurately control the Falcon's aerial movement Whether you are a experienced pilot looking for a second 3D helicopter, or a experienced pilot looking to get into 3D flight, the Falcon 3D beckons. \n\nFeatures: \nIntelligent Design: Reinforced Carbon Fiber Tail, Metal Main Frame. Powerful Transmitter. Quality Components: Independent Head Lock Gyro and 30A Brushless ESC. 1300mAH 3-Cell Li-Po. CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights. Powerful Motors: B20/10T Brushless motor. Autorotation Landing System Protects Helicopter from Damage. \n\nSpecs: \nType:Helicopter. Channel:6. Kit/RTR:Ready to Run. Main Rotor Diameter:24.8 in (630mm). Tail Rotor Diameter:5.98 in (152mm). Main Rotor Motor:B 20 Motors. Tail Rotor Motor:10T. Overall Length:26.37 in (670mm). Overall Height:7.17in (180mm). Overall Width:3.47in (85mm). Body:Lightweight Carbon Fiber Framework. Total Weight:18.69 oz (530 g). Flight Mode:Normal and 3D. Pitch:Mechanical CCPM. Gyro:Headlock Gyro System. Servos:4 x 9g Servo. Charger:110-220V. Battery:1300mAH 3-Cell Li-Po. Full Charge:3-5 hours. Flight Time:8 - 15 minutes. \n\nComes with: \nFalcon 3D helicopter RTF. 30 Amp brushless speed controller. brushless speed 400 class motor with heat sink. 6-channel micro receiver and heading hold gyro. Four micro servos to control pitch, yaw, rudder, and collective. 6-Channel Transmitter with two switches and two rotary knobs to control pitch. 1300 mAh 3-Cell Battery pack. 100V to 200V Power Adapter. Li-Po Charger. \n\nStill needed: \n8AA (required for the transmitter). \n\n

Additional Details